California Residents: Prop 65 WarningDescription
TrackTech Complete Top End Cylinder Head Gasket / Studs Service Kit
Fitment
1998.5-2002 Dodge Cummins 5.9L 24V
TrackTech Head Stud Kit SKU: TTC98520HS010
(Please see the installation instructions in the Technical Documents section of this listing.)
- (20) Cylinder Head Studs (Shorter)
- (6) Cylinder Head Studs (Longer Exhaust side location outside of the valve cover)
- (26) Cylinder Head Stud Nuts
- (26) Cylinder Head Stud Washers
The highest tensile strength in class TrackTech Head Studs are manufactured with the highest tensile strength in the industry at 240,000 PSI. They are tested several ways including in the lab using a state-of-the-art UTM machine validating 240k PSI tensile strength. Plus, on the track where racers put TrackTech fasteners through the most demanding conditions making these head studs the race-proven choice for your 5.9L Dodge Ram Cummins 24v.
- 240,000 PSI Tensile Strength
- UTM Machine Tested and Validated
- Lab, Bench, Street and Strip Tested
MAHLE HEAD SET HS54174-2
- (1) 3977063 Gasket, Cylinder Head
- (2) 3037236 Seal, O-ring
- (1) 3519807 Gasket, Turbocharger (Cummins Equiv. 3914388)
- (1) 3709861 Gasket, Turbocharger (Cummins Equiv. 3901356)
- (6) 3867043 Seal, O-ring
- (1) 3883284 Seal, O-ring
- (1) 3902425 Washer, Sealing (M22)
- (2) 3922794 Seal, O-ring
- (1) 3931824 Seal, O-ring
- (1) 3935878 Gasket, Valve Cover
- (1) 3937706 Gasket, Oil Drain (Replace with 5264569)
- (1) 3938152 Gasket, Intake Manifold Cover
- (5) 3942659 Isolator, Noise
- (12) 3942989 Seal, Valve Stem
- (12) 3945438 Seal, Valve Stem
- (6) 3946275 Gasket, Exhaust Manifold
- (2) 3969988 Gasket, Connection
Oem Parts # for Reference Purpose only
Supplemental Parts
Since this is a major repair we suggest using the best available hardware to get the job done right the first time. Here are some supplemental items our customers have chosen when opting to complete this repair: Thermostat, CCV Filter, Fuel Filter, Oil Change, Coolant Change, Engine Air Filter
TrackTech Exhaust Manifold Studs SKU: TTC8920ES410
TrackTech Exhaust Manifold to Turbo Studs SKU: TTC8907ES409
TrackTech Tappet Cover Bolts SKU: TTC8902AB602
For a Bottom End repair you will also need the following
If the repair requires the removal of pistons or the crankshaft you will need the following in addition to the parts outlined above. Timing Cover Gaskets, Front Crank Seal, Rear Crank Seal, Pistons or Piston Rings, Rod Bearings, Main Crank Bearings etc.
