Description
Power Probe Professional Electrical Test Kit
Fitment
Universal
The Power Probe Professional Electrical Test Kit provides the circuit testing ability of the Power Probe 3 combined with the diagnostic capabilities of the Power Probe Digital Multimeter.
Content:
- Power Probe 3
- Probe Tip
- Battery Clip-Set
- Digital Multimeter
- Two 5 Foot CAT-IV 600V test leads
- Two Alligator Clips
- K-Type Temperature Probe
- Magnetic Holding Strap
- Spare 600V 10 Amp fuse
- Spare 600V 600 Milliamp fuse
- Blade Probe Adapter
- Back Probe Adapter
- Male/Male Adapter
- Female/Female Adapter
- 10Ft. Lead Black
- 10Ft. Lead Red
- Three Standard AAA Batteries
Features:
- Voltage & Polarity testing
- Continuity testing
- Activating components out of the vehicle’s electrical system
- Activating electrical components in the Vehicle
- Activating electrical components with ground
- Testing trailer lights and connections
- Checking for bad ground contacts
- Red/Green Indicator & Audio Tone
Specs:
- DC 0 to + 70V +1 Digit
- P-P 0 to + 70V
The frequency response of tone pass through - 10Hz to greater than 10 kHz
PP Display - 15 Hz Square Wave
- 35 Hz Sine Wave
Power Probe Mode – Continuity to ground - First level – Display is enabled less than 20 K Ω
- Second level – Green LED is enabled less than 600 Ω
– & +Peak Detector Response - Single event capture less than 200ms pulse width
- Repetitive events less than 1ms pulse width
Peak to Peak Mode - 0 to + 70 + 1 Digit
- 4Hz to over 500kHz Square Wave input
- 4Hz to over 250kHz Sine Wave input
- The threshold for PPAC/Audible passthrough
- Circuit Breaker 8 amp thermal response – Manual reset
Typical Response
8 amps | 10amps | 15amps | 25amps | Short Circuit
No Trip | 20min | 6 sec. | 2 sec. | 0.3 sec.
Multimeter
Data Hold, Min/Max Capture, Relative Measurement, Diode/Continuity Tester. Perfect for Automotive use with Loud Indication Tones, 15 min auto-off function, rugged rubberized housing.
- Digital Volt and Ohmmeter for circuit testing
- CAT-IV 600V Hybrid Safe AC/DC Voltmeter
- Measures Voltage from 0.1mV to 600V
- Measures Current from .01mA to 10 Amps
- Measures Temperatures from -4℉ ~ 1832℉ (-20℃ ~ 1000℃)
- Measures Resistance/Diode/Continuity 0.1Ω to 60M Ohms
- Measures Capacitance 0.0001µF to 60,000µF