Engine and Diesel Fuel System Care Kit – Liqui Moly LMK001
Universal Diesel Applications with up to 10 Liters of Oil Capacity
- (2x) LM2037 Pro-Line Engine Flush (500ml)
- (2x) LM20002 CERA TEC Engine Oil Additive (300ml)
- (1x) LM20252 Truck Series Complete Diesel System Cleaner (500ml)
- (4x) LM20254 Truck Series Diesel Performance And Protectant (500ml)
We take preventive maintenance seriously and we believe you should too! Here at ProSource Diesel, we have worked closely with Liqui Moly to create a simple maintenance kit using the highest quality products that will allow you to not only extend the service life of your truck but help ensure clean and trouble-free operation for years to come.
This kit pairs products that complement each other and work together to help provide the highest levels of protection for your vehicle.
Included in this kit are:
LM2037 Pro-Line Engine Flush
The flush gently cleans the insides of the engine and helps with the removal of dirt and sludge that has built up over the years. This is a must when switching oil brands or types.
Pour in 1 bottle for every 5 Liters of oil.
Run the vehicle at idle for 10-13 minutes.
(DO NOT DRIVE YOUR TRUCK)
Then proceed with draining the oil, replacing the fuel filter, oil filter, and pour in fresh oil from Liqui Moly with your Truck’s OE Approval.
LM20002 CERA TEC oil additive
CERA TEC helps to protect the engine by reducing friction and wear thanks to a unique combination of ceramic compounds and chemical anti-wear agents. It will prevent direct metal-to-metal contact thus lowering friction to increase engine life and reduce fuel consumption in your truck. In order for the additive to take full effect, it takes approximately 700 miles.
Add 1 bottle of CERA TEC for every 5 liters of oil. (CERA TEC has a milky color to it. This is normal)
CERA TEC is designed to be used every 5th oil change or every 25k miles.
LM20252 Truck Series Complete Diesel System Cleaner
An effective mixture of additives for rapid removal of performance diminishing deposits from the fuel system in all kinds of diesel engines. Cleans injectors, the combustion chamber and restores proper fuel atomization for improved engine efficiency.
Add this product directly to your fuel tank at the time of your Oil and Filter change. It is suitable for use in all diesel engines, with or without turbochargers. It’s also safe for use with catalytic converters and particulate filters (DPF).
One (500 mL) bottle is sufficient for 25–150 Liters (7 gal. to 40 gal.) diesel. The effect lasts up to 2000 km (1200 miles) depending on the type of vehicle use. For trucks that are idled for extended periods of time, we suggest shortening the interval. Ideally, this is added at every fuel fill up from empty under normal use.
LM20254 Truck Series Diesel Performance And Protectant
An effective mixture of additives that clean and maintain diesel fuel systems. Prevents corrosion, increases lubrication thus reduces fuel pump and injector wear. Increases Cetane value for improved engine performance, easier starting, and lower emissions. Regular use keeps the fuel system in perfect working order.
Whereas the Diesel System Cleaner is used once every 5,000 miles this Diesel Performance and Protectant Additive is used once every 1,000 miles after the initial Diesel System Cleaner was used. This product will help maintain the cleanliness and efficiency of the entire fuel system in between Oil and Filter Changes.
This selection of treatments should be used together to ensure your engine enjoys smooth and trouble-free operation. It is suggested that this kit be purchased every 5th oil change or every 25k miles.