Dual CP3 Pump Hardware Kit For 2010-2012 6.7L Dodge Cummins 24V

Description

Dual CP3 Pump Hardware Kit

***Ships Directly From the Manufacturer – Additional Processing Time Required (an email will be sent with expected shipping date after purchase)***

Fitment

10-12 6.7L Dodge Cummins 24V

The Fleece FPE-DPK-67-1012 Dual CP3 Pump Installation Kit includes all the components you need to begin the build of your custom Dual CP3 Fuel System on your 2010-2012 Dodge 6.7L Cummins. A Dual CP3 system adds an additional CP3 in conjunction with your factory pump so you can make the most out of your aftermarket tuning, injectors, and other upgrades. Combine this Fleece hardware kit with a CP3 Pump, Spoked or Solid pulley, Fleece Fuel Distribution block, and a hose and fitting kit to complete your fuel system (other components sold separately).

Kit Contents:

• Cummins Common Rail Dual CP3 Bracket
• Cummins Heavy Duty Dual Pump Belt
• Fan Shroud Bracket
• Dual Pump Pulley – Idler
• Cummins Dual Pump Idler Pulley Spacer
• Cummins Dual Pump Controller
• High-Pressure Dual Pump Line (CP3 to CP3)
• High-Pressure CP3 Fitting and Non-Return Valve
• (6) M8x1.25 Flange Nuts
• (6) M8x1.25×50 Carriage Bolts
• M10x1.5x40mm Flange Head Cap Screw
• M8×1.25 Flange Head Cap Screw
• M18x1.5 CP3 Nut

Features:

• Easy Install Kit
• Exclusive Pump To Pump line
• Increased Engine Performance

Other items that are needed:

• Pulleys (Link)
• Fuel Distribution Block (Link)
• Hose and Fitting Kit (Link)
• CP3 Pump (Link)
• CP3 Pump Powerflo 750 (Link)
• Transmission Cooler Line Set (Link)

Application Note:

This kit will not work with a Factory Intake Horn, an aftermarket one such as a Banks Intake Horn must be used. A 6.7 pump is required for use in the secondary (top) location. All Fleece Performance Dual Pump Kits require a Cummins 6.7L CP3 pump in the secondary location. The 2010-2012 kit will not work with factory 68RFE transmission lines. The factory 68RFE transmission lines will interfere with the pump pulley. We offer a replacement transmission cooler line set (P/N: FPE-TL-CUMM-1012) that will allow for the installation – Link